Skip to content

Energy Procurement

Utility strategic sourcing: what it covers, and how it differs from buying energy

Utilities are often the one category a business buys without a sourcing process. What strategic sourcing covers for electricity, gas and water, and where it differs from buying energy.

Cohen Robinson8 min read

Utilities are often the one category a business buys without a sourcing process. The same team that might award a cleaning contract without a specification might also accept an electricity rate off nothing but an email. For novice energy procurers, the most obvious variable is price, which is all that gets evaluated.

Utility strategic sourcing is the procurement method applied to electricity, gas and water. You define what the organisation actually needs, decide who gets asked to supply it, then evaluate the answers on cost across the whole contract rather than on a rate. Buying energy is one moment inside that, the moment an offer is accepted.

That decides where in the process the market gets involved. Sourcing approaches the market after the requirement is written. Buying starts when an offer turns up.

What it covers

A full cycle: the requirement, the data and authority behind it, the field of suppliers, the approach to market, the evaluation, then the management of what was signed until the next cycle starts.

The method isn't specific to energy. Its clearest written statement in Australia sits in the Commonwealth Procurement Rules, which govern public sector buying and put it plainly: price is not the sole factor in value for money. Whole-of-life cost is, and whole-of-life includes the cost of getting out.

In utilities those items are specific. They include your termination exposure if you leave early, the cost of changing retailer across a portfolio, metering and data charges, and the standing cost of checking invoices for the length of the term. Certificate liability belongs on the list too, and it can sit with you rather than your retailer, because under the Renewable Energy Target liable entities usually include retailers but also wholesale electricity buyers and large-scale electricity users.

None of them appear on a rate sheet, and all of them are part of what the contract costs.

The line between sourcing and buying

Buying energy compared with sourcing utilities across six rows, from what each starts from to where each ends

The first difference is the one that produces the rest.

Buying starts from a rate on an offer. Sourcing starts from a requirement you wrote: the load shape, the term, the structure, where you want risk to sit. Once that exists, the unit of work becomes the category across every site rather than one contract at one site. You set the field deliberately instead of taking whoever happened to quote, and the comparison runs on cost over the term rather than the headline rate.

Buying ends at signature. Sourcing ends at the next review, which means somebody is still accountable in month fourteen.

There is nothing wrong with buying energy. The limit is that a purchase closes at signature. The register, the specification and the terms you worked out are not there the next time, so the following renewal starts where the last one did.

Why do utilities resist a standard sourcing playbook?

None of this is anyone's fault. Networks, the market operator and retailers each set a different part of the price, and nobody owns the job of making the result comparable.

What you buy is a shape, not a volume. A price for a given annual consumption means nothing until you say when that consumption happens. Half-hourly interval data is the requirement document in this category, and until a retailer has it they're pricing a guess and charging you for the uncertainty. It's also why a portfolio gets assembled by connection point. A connection point is identified by a National Metering Identifier, and one premises can hold more than one.

Part of the cost is regulated and part of it moves daily.

The four parts of an electricity price as named by the AER, with wholesale highlighted as the part a sourcing decision moves most directly

The AER describes an electricity price as four components: network costs, wholesale costs, environmental costs, and retailer costs and margins, with wholesale and network the largest two and the leader varying by distribution network. Network charges are regulated and not negotiable, but the tariff a site sits on is.

Demand charge design isn't standard at all. One network applies a 12 month ratchet on the highest half-hourly kVA in an evening window, another resets monthly, and another runs two simultaneous demand charges. So two sites with the same load, in different networks, get billed under different rules, and nothing on the invoice tells you which. Somebody has to know that site by site before a single offer can be compared.

Those terms are contestable as well. The AER made a Victorian distributor remove a minimum chargeable demand from its 2026-31 tariff structure statement.

Offers aren't comparable unless you make them so. How network charges reach your price is at the retailer's discretion, which the distributors state plainly in their own published pricing overviews. Two quotes for the same load can be unlike each other on their face. That's a packaging decision rather than a trick, and the remedy sits upstream: specify the structure in the requirement and the offers come back in one shape.

The clock is part of it too. The ACCC found in 2018 that the barriers to engaging with retail energy markets reach well past small businesses. In the same report, medium-sized businesses described the same difficulty comparing complex offers, and response windows shrinking from about a week to a few days when wholesale prices moved. That is the case for writing the requirement before the window opens. When an answer has to come back in two days, the work that decides it has either been done already or it has not.

Where does sourcing sit against category management?

Category management is the standing ownership of a spend category. It holds the register of connection points, the end dates, the supplier performance record and the date the next cycle starts. Strategic sourcing is an event inside it, run every few years when a contract or a portfolio comes up.

No Australian government body defines either term. Both are procurement convention, and the labels get used as though they were standards.

What happens if you skip either is not a matter of convention. Sourcing with nobody owning the category afterwards leaves no one holding the contract between renewals. That is when sites get added without being priced, invoices stop being checked against the contract, and the end date arrives unnoticed. It is one of the two gaps procurement audits keep finding. Settle who should own utilities before the first cycle runs, not after it.

The sourcing cycle, stage by stage

A utility sourcing cycle in six stages, with defining the requirement highlighted as the stage that sets the value of the rest

Stage four is where most people think the work starts. Stages one to three are where the result gets decided, and stage two is where the calendar goes, because it needs a signed authority to act before anyone can pull the metering data. The stage-by-stage detail sits in the utility procurement process, and the positions stage one is written from belong in a utility contract strategy.

A word on the paperwork, because the names cause more argument than they deserve. The Commonwealth Procurement Rules distinguish an open tender, where the approach to market is published and anyone may respond, from a limited tender, where suppliers get approached directly, and that distinction carries weight. The labels don't. The rules name a request for proposal alongside a request for tender, a request for quote and an expression of interest without defining the differences, and "request for pricing" doesn't appear at all. Decide the field and the evaluation. What the document is called follows from those two choices and changes neither.

What changes when it is run this way

In our experience the register becomes a maintained asset rather than a scramble. Retailers price with less uncertainty, because the load and the terms arrive specified. And the portfolio stops being a set of contracts expiring on unrelated dates, which is the quiet cost of having bought rather than sourced.

It also makes the result attributable. When the whole requirement goes to market on one brief, you can say what moved and why, which is a different conversation with a board than reporting a rate.

Talk to us

Utility strategic sourcing is the discipline behind utility sourcing, and a portfolio is where the difference shows. On a multi-site property portfolio we ran the whole category rather than site by site, and electricity came back 18.9% lower with 35% off the LPG.

To see what your utilities look like as a sourced category instead of a stack of contracts, Talk to us. We go to more than 20 retailers, show you everything they quote, and tell you which one is right for your business, and why.

Frequently asked questions

Is utility strategic sourcing the same as energy procurement?

Energy procurement is the work of getting supply contracts in place. Strategic sourcing is the method it runs by, and it covers water, gas and LPG alongside electricity, plus what happens to the contract after signature.

Do you need a tender to run a sourcing process?

No. A tender is one way to approach the market, and the Commonwealth Procurement Rules distinguish an open tender from a limited one where suppliers get approached directly. What matters is that the requirement is defined, the field is set deliberately, and every offer is priced on the same assumptions.

What is the difference between strategic sourcing and category management?

Sourcing is an event, run every few years. Category management is the standing ownership between those events: the register, the end dates, the performance record and the next start date. Neither is a defined term in Australia, so check what someone means by them.

Can a mid-sized business run this without a procurement team?

Yes, with one qualification. The method doesn't need a department, it needs a named owner and the data. What goes wrong is nobody holding the register when a renewal lands, not a missing team.

Why can't two energy offers be compared on the rate?

Because how network charges reach your price is at the retailer's discretion, so one offer may bundle costs into the energy rate that another passes through separately. Unless the requirement specifies the structure, you're comparing packaging rather than price.

Newsletter

The energy market, read for you once a month

The Energy Market Update: what moved last month, what it means, and what to do before your next renewal. One email a month, unsubscribe any time.

Step 1 of 2: your email

Next, your name and company. Unsubscribe any time.

We only use your details to respond to you, as set out in our privacy policy.

Where do you stand?

Get a clear read on your energy position.

We'll benchmark what you're paying against the wider market and tell you your options. No cost, no obligation.